Type FT-9 Flush Pull-through Rivet

Product Description
 

Type FT-9 Flush Pull-through Rivet features a true zero-protrusion head (≤0.05mm surface deviation) that self-aligns during pull riveting to achieve flush mounting on 0.8–3.0mm sheet metal—eliminating EMI leakage paths in RF-sensitive assemblies. Validated to 300% higher shear strength vs. standard countersunk rivets (per ASTM F606), it delivers tool-free installation in 4.2 seconds (vs. 8.7s for threaded fasteners) with no secondary grinding. Critical for maintaining IP54-rated panel integrity where even 0.1mm protrusion disrupts gasket sealing (IEC 60529 Clause 14.2).
 

Industry Applications
 

Deployed where flushness = regulatory compliance, including:

Server Rack Internal Frames (Dell PowerEdge chassis requiring EMI shielding continuity for PCIe 5.0 compliance at 32GT/s)

5G Massive MIMO Arrays (Ericsson AIR 6488 enclosures needing vibration-proof flush mounting for 28GHz beamforming accuracy)

EV Battery Pack Endplates (Bosch eAxle housings exposed to thermal cycling from -40℃→85℃ without gasket compression loss)

Medical Imaging Panels